Our Technology, solution for Tomorrow too!

Digital Meter / Printer

Digital Panel Meter

MODEL 451F

  • ■ Highly visible large LED Display
  • ■ Grouped commonly-used parameters
  • ■ Scaling, Average processing function, and Peak & Bottom hold function
  • ■ Water- and dust-proof IP65 front panel

Operation manual

Model Designation

451F - - -

①Measuring input

Code Measuring range Input impedance Accuracy Over load
22A 99.99 mVrms 100 kΩ ±(0.2% of rdg + 10digits) AC 10 V
23A 999.9 mVrms 100 kΩ AC 100 V
24A 9.999 Vrms 1 MΩ AC 400 V
25A 99.99 Vrms 1.9 MΩ
26A 699.9 Vrms 1.9 MΩ ±(0.3% of rdg + 10digits) AC 700 V
32 99.99 μArms 1 kΩ AC 20 mA
33 999.9 μArms 100 Ω AC 50 mA
34 9.999 mArms 10 Ω AC 150 mA
35 99.99 mArms 1 Ω AC 500 mA
36 999.9 mArms 0.1 Ω ±(0.5% of rdg + 10digits) AC 2 A
5.000 Arms 0.01 Ω AC 10 A

②Power supply voltage

Code Power source voltage
A AC 100 to 240 V
B DC 12 to 24 V
C DC 110 V

③Data output 1

Code Data Output Output impedance Tolerable Load resistor
Blank -
09 Analog output DC 0 to 10 V
(Available scaling, Default: 1 to 5 V)
Less than 0.1 Ω More than 500 Ω (DC 1 to 5 V)
More than 1 kΩ (DC 0 to 10 V)
29 Analog output DC 0 to 20 mA
(Available scaling, Default: 4 to 20 mA)
More than 5 MΩ 0 to 600 Ω (DC 4 to 20 mA)
BP BCD output (TTL level positive logic) -
BN BCD output (TTL level negative logic) -
DP BCD output (transistor output, source type) -
DN BCD output (transistor output, sink type) -
E0 RS-232C -
E1 RS-485 -
EC Decimal point external control -

④Data output 2 (Available- 09 and -29 of ④ Data output 1 only)

Code Data output
Blank No output
E0 RS-232C
E1 RS-485
EC Decimal point external control

Basic Specifications

Display 0 to 99999, red or green LED (character height 15.2 mm), with zero-suppress function.
Scaling offset 0 to +9999
Scaling full scale 0 to +9999
Display cycle Selectable from 500ms, 1s, 2s, 4s, 5s
Resolution 1/10000
Sampling rate Approx. 2 times / s.
Response within 2 samplings or 1 display cycle, whichever longer
Input method Single ended, floating input
A/D conversion ⊿-∑conversion method
Noise Rejection Noise through power supply line - 1000 V (at AC voltage power supply)
Insulation Resistance DC 500 V, More than 100 MΩ
Withstand Voltage Input terminals - External case: AC 1500 V each for 1min.
Power supply terminals - External case: AC 1500 V each for 1min.
Power supply terminals - Input and output terminals: AC 500 V each for 1min.
Input terminals - Output terminals: AC 500 V each for 1min.
Power Supply AC 100 to 240V (90 to 250 V) 50/60 Hz, DC 12 to 24 V (9 to 32 V)
Power Consumption Approx. 9 VA at 100 V AC, 11.5 VA at 200 V AC, 400 mA at 12 V. 200 mA at 24 V DC.
Operating Temperature 0 to 50°C
Storage Temperature -20 to 70°C
Weight Approx. 300 g (60 g of the power supply unit)
Housing protection IP65 for the front panel, IP20 for the rear case, IP00 for terminals

page top