Our Technology, solution for Tomorrow too!

Digital Meter

AC Input Scaling Meter

MODEL 3195

  • ■ Compact design of 48 x 24 mm, RMS value type
  • ■ Scaling function and zero supress fucntion are equipped.
  • ■ Max. display 9999

Operation manual

Standard Specifications

Model Designation

3195 - -

①Measuring Input

Code Measuring Range Input Resistance Accuracy *1 Overload *3
23 999.9 mV rms 1 MΩ ±(0.2% of rdg. + 10 digit) AC 100 V
24 9.999 V rms 1 MΩ AC 200 V
25 99.99 V rms 10 MΩ AC 250 V
26 300.0 V rms 10 MΩ AC 300 V
35 99.99 mA rms 1 Ω ±(0.3% of rdg. + 10 digit) AC 500 mA
36 999.9 mA rms 0.1 Ω *2 ±(0.5% of rdg. + 10 digit) AC 2 A
37 2.000 A rms
*1 Accuracy:
Defined at 23 ± 5°C, 45 to 75% RH.
Defined with sine wave of input frequency 40 Hz to 1 kHz, and at 4% or more of the rated input.
*2
External shunt resistor 0.1 Ω
Temperature coefficient:
± 300 ppm/°C. Defined over an operating temperature range of 0 to 50°C
Crest factor:
4 (peak 500 V for -26, peak 3 A for -36 and -37)
*3 Overload (1min):
Applying a voltage or current that exceeds the excessive input range to the input may damage the equipment.
Note:
The display will show 0, when the input is less than 0.1%of the rated input.

②Display Color

Code Content
R Red LED
Green LED

General Specifications

Display 000 to 9999 Red or green LED (character height 10 mm) with zero suppression function
Scaling function Full scale display: 0 to 9999
Offset display: 0 to 9999
Offset fixing function Function of fixing display value to offset value when input is less than offset value.
100 digit fixed to 0 Setting is possible.
Decimal point display Setting is possible from the front panel.
Over-range display Flashing with 115% display.(But when exceeded 9999, flashing is displayed by 0000.)
Resolution 1/10000
Sampling rate 1 time/sec.
Display cycle 1s
Input configuration Single ended
A/D conversion Δ-Σ conversion system
Insulation resistance DC 500 V than 100 MΩ or more
Withstand voltage Between input terminal and outer case: AC 500 V 1minute
Between power supply terminal and outer case: AC 500 V 1minute
Between power supply terminal and input terminal: AC 500 V 1minute
Power supply DC 12 to 24 V
Power supply voltage tolerance DC 10.8 to 32 V
Power consumption DC 12 V Approx. 50 mA
DC 24 V Approx. 30 mA
Operating ambient temperature 0 to 50°C
Storage temperature -20 to 70°C
Weight Approx. 45 g

page top