Transducer
Basic Specifications
Model Designation
| 7592 | - | □ | - | □ | - | □ |
| ① | ② | ③ |
| Code | Input Signal |
|---|---|
| 1 | 14 bit with polarity |
| 2 | 4 digits BCD with polarity |
| Code | Power Supply Voltage |
|---|---|
| 3 | AC 100 V(90 to 132 V) |
| 5 | AC 200 V(180 to 264 V) |
| 9 | DC 24 V ± 10% |
| Code | Output Signal |
|---|---|
| 01 | DC 0 to 10 mV |
| 02 | DC 0 to 100 mV |
| 03 | DC 0 to 1 V |
| 04 | DC 0 to 5 V |
| 05 | DC 0 to 10 V |
| 09 | DC 1 to 5 V |
| 00 | Except above DC voltage output (10 mV to 10 V) |
| 13 | DC ±1 V |
| 14 | DC ±5 V |
| 10 | Except above DC ±voltage output (±10 mV to ±10 V) * During DC Power: Less than ±5 V |
| 23 | DC 0 to 1 mA |
| 29 | DC 4 to 20 mA |
| 20 | Except above DC current output (100 µA to 20 mA) |
Input Specifications
| Input signal | No voltage contact or open collector, TTL level IIL ≦ -1 mA, L = 0 - 1.0 V, H = 3.5 – 5 V |
||||||
|---|---|---|---|---|---|---|---|
| Polarity input (POL) |
|
||||||
| Over range input (OVER) | Polarity logic is positive (over): “H” level Polarity logic is negative (over): “L” level |
||||||
| Hold input (HOLD) | The output is held by connecting pin with COM and making it “L” level. | ||||||
| Synchronization signal (SYNC) | Make an input of synchronized negative pulse when the width is more than 1ms. It captures the pulse raising data. |
Output Specifications
| Output Signal | Output Impedance | Tolerable Load Resistance |
|---|---|---|
| DC 0 to 10 mV | Approx. 10 Ω | More than 10 kΩ |
| DC 0 to 100 mV | Approx. 100 Ω | More than 100 kΩ |
| DC 0 to 1 V | Less than 0.1 Ω | More than 100 Ω |
| DC 0 to 5 V | More than 500 Ω | |
| DC 0 to 10 V | More than 1 kΩ | |
| DC 1 to 5 V | More than 500 Ω | |
| DC ±1 V | ||
| DC ±5 V | More than 2.5 kΩ | |
| DC 0 to 1 mA | More than 5 MΩ | 0 to 15 kΩ (During DC power: 0 to 10 kΩ) |
| DC 4 to 20 mA | 0 to 7500 Ω (During DC power: 0 to 500 Ω) |
General Specifications
| Allowance | ±0.15% of SPAN at 23°C | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Resolution |
|
|||||||||
| Response | Approx. 20ms(0→90%) Less than 0.2s (0→90%)in case of internal synchronization |
|||||||||
| Temperature coefficient | ±150 ppm/°C | |||||||||
| Output adjustment range | ZERO：More than ± 3% of SPAN SPAN：More than ± 5% of SPAN |
|||||||||
| Insulation resistance | Between input terminals and output terminals: DC 500 V More than 100 MΩ | |||||||||
| Withstand voltage |
|
|||||||||
| Power supply voltage |
|
|||||||||
| Operating temperature | -5 to 55°C | |||||||||
| Storage temperature | -20 to 70°C | |||||||||
| Weight | Approx. 370 g(AC) / Approx. 210 g(DC), Socket： Approx. 70 g |
