Measuring Instrument & Tester
10 kV type AC Withstand Voltage Tester
MODEL 8529A
- ■Output voltage: AC 10 kV, 500 VA
- ■9 types of test memories can be stored.
- ■RS-232C output enables easy setting and obtaining test results.
- ■Safety measurements like Interlocks, Key locks and Remote function are available.
Model Designation
8529A : for power supply voltage AC100V (Standard)
8529A-P115 : for power supply voltage AC115V
8529A-P200 : for power supply voltage AC200V
8529A-P220 : for power supply voltage AC220V
8529A-P240 : for power supply voltage AC240V
Specifications
| Test Voltage | |
|---|---|
| Output Voltage | AC 0 to 5 kV / 0 to 10 kV, 2 ranges |
| Output Capacity | 500 VA (10 kV, 50 mA) Note: For output current 25 mA within 30 min. |
| Waveform | Commercial power supply waveform |
| Voltage Fluctuation Rate | Less than 15 % (no load → maximum load) |
| Voltage Output Method | Zero cross input switch |
| Output Voltage Setting | Manual setting with volt slider |
| Voltage Measurement | |
| Rectification Method | Average effective value display |
| Analog Indicator | Scale: AC 0 to 10 kV Accuracy: ± 5 % |
| Digital Indicator | Display range: AC 0.00 to 12.0 kV Green LED Output voltage is displayed during test, the judgment value is retained after the end of test. Accuracy: ± 1.5 % of F.S. (at F.S. 5 kV or 10 kV) |
| Current Measurement | |
| Rectification Method | Average effective value display |
| Measuring Range | 0.01 to 55.0 mA |
| Display | 3.5 digit (1999) digital display Green LED Leakage currentis displayed during test, the judgment value is retained after the end of test. |
| Resolution | AC 0.01 mA (0.1 to 9.9 mA), 0.1mA (10.0 to 55.0 mA) ( ) indicates upper limit setting value |
| Measuring Accuracy | Upper limit setting value ± (5 %+20 μA) |
| Test Result Judgment | |
| Judgment Method | Upper limit: Analog comparator Upper/lower limit: Digital comparator |
| Setting Range | Upper limit: 0.1 to 55.0 mA Lower limit: 0.0 to 54.9 mA With ON/OFF function for lower limit Resolution: 0.1mA |
| Judgment Conditions | Upper limit > display value > Lower limit ... GOOD Upper limit ≦ display value ... HIGH NG Lower limit ≧ display value ... LOW NG |
| Test Time | |
| Setting Range | 0.5 to 999 s (with Timer OFF function) |
| Setting Resolution | 0.1 s (0.5 to 99.9 s), 1 s (100 to more than 999 s) |
| Time Display | Timer ON: Remaining time is display Timer OFF: Elapsed time is display |
| Accuracy | ± 20 ms (0.5 to 99.9 s), ± 200 ms (100 to 999 s or more) |
Data Output
| Voltage Monitor Output ... Output voltage can be obatained for monitoring. | |
|---|---|
| Monitor Output | DC 0 to 5 V (corresponding to AC 0 to 5 kV) |
| Accuracy | ± 1.5 % of F.S. |
| RS-232C Output ... Test conditions and test results can be output. ※Utility software (option) is available. |
|
| Connector | D-sub 9P |
| Transmission Method | Full duplex synchronization |
| Transmission Speed | 9600 bps |
| Data Length | 8 bit |
| Parity | none |
General Specifications
| Power Supply | AC100V 50/60Hz (AC 115 V / 200 V / 220 V / 240 are available.) |
|---|---|
| Power Supply Voltage Tolerance | AC 90 to 110 V |
| Power Consumption | Rated load: approx. 650 VA No load (standby state): approx. 16 VA |
| Operating Ambient Temperature | 0 to 40 °C |
| Operating Humidity Range | 20 to less than 80 %RH (no condensation) |
| Storage Temperature | -20 to 70 °C Less than 90 %RH (no condensation) |
| Withstand Voltage | Between power supply and Outer box: AC 1000 V 1 minute |
| Size | 320(W) × 180(H) × 430(D )mm |
| Weight | Approx. 20 kg (Approx. 5.5kg is added for optional power supply models.) |
| Accessories | High voltage cable: 2m 1 set Ground cable: 3m 1 pc Power cord: 2.5m 1 pc REMOTE I/O plug: 1 pc Fuse: 1 pc Operation manual: 1 pc |
| Optional Accessories | Remote control box 5858-07 Both-hands remote control box 5858-07W Foot switch 5858-04 Rack mounting bracket 5871-03-020 RS-232C cable 5881-11-018 Utility software (Japanese) 5890-02 |
